-
January 13th, 2002, 08:39 PM
#1
Inactive Member
i'm not gonna ramble. plain and simple, i have a leaking injector. i'm assuming it's from the fender bender.
what is the best solution for the problem?
ami
------------------
www.4thgenerationcivic.com
"Hi, my name is Ami and I'm a Honda-coholic"
-
January 13th, 2002, 10:59 PM
#2
Inactive Member
Ami: leaking as in the seal around the injector where it mounts to the fuel rail or leaking as in it's not opening/closing when it should (staying open all the time).
To check the seal, spray some WD40 (you have this in the US?) around the seal - it will briefly seal the hole and let you run normally as a dignostic.
If the injector itself is rooted, you could take it to an EFI specialist to get it checked/cleaned or go to wreckers and get a replacement one. Easier to replace than repair IMO and you'll find suitable ones easily (you're running a D16 aren't you?).
------------------
'90 JDM EF9 SiR
-
January 14th, 2002, 01:19 AM
#3
Inactive Member
I'd just replace the seals and filters on the injectors anyway. I did it on my car a while back just for preventative maintenence. you should be able to get the set from the dealer.
------------------
PERFORMANCE REFINISHING, Inc.
Home to all your High Peformance Honda needs!
visit us at http://www.pri-racing.com
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks